manualshive.com logo in svg

Oxford Instruments ANDOR Mosaic3, Руководство по оборудованию

Поделиться
Скачать
Oxford Instruments ANDOR Mosaic3 Скачать руководство пользователя страница 27

Mosaic3

27

Version 3.5 rev 8 May 2019

INTRODUCTION

1.2   d

iscLaimer

THE INFORMATION CONTAINED HEREIN IS PROVIDED “AS IS” WITHOUT WARRANTY, CONDITION OR 
REPRESENTATION OF ANY KIND, EITHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT 
LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR 
PURPOSE.

IN NO EVENT SHALL ANDOR BE LIABLE FOR ANY LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT, SPECIAL, 
INCIDENTAL, CONSEQUENTIAL OR OTHERWISE HOWSOEVER CAUSED WHETHER ARISING IN CONTRACT, TORT 
OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE INFORMATION PROVIDED HEREIN.

1.3  c

opyright

 

and

 p

rotective

 n

otices

The copyright in this document and the associated drawings are the property of Andor Technology Ltd. and all rights 
are reserved. This document and the associated drawings are issued on condition that they are not copied, reprinted or 
reproduced, nor their contents disclosed.

The publication of information in this documentation does not imply freedom from any patent or proprietary right of 
Andor Technology Ltd. or any third party.

1.4  t

rademarks

 

and

 p

atent

 i

nformation

Andor and the Andor logo are trademarks of Andor Technology Ltd. Andor is an Oxford Instruments company. All other 
marks are property of their owners. The system and various components in the system are the subject of the following 
US patents: 6,885,492 6,072,892 and 7,034,983 other patents pending.

Changes are periodically made to the product and these will be incorporated into new editions of the manual. New 
releases of the manual are available through MyAndor: 

http://my.andor.com/login.aspx

.

Содержание ANDOR Mosaic3































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды