Version 1.9 rev 21 Oct 2019
32
IKon-XL
In the U.K, Ireland and some other countries, the supplied mains cable has a BS 1363 (or Type G) plug that includes an
integrated fuse. Only replace with fuse of the same type and rating for continued protection. The characteristics of a
replacement fuse are as follows:
•
Rating
: 5A 240 VAC
•
Type
: BS 1362, size: ¼ × 1” (6.3 × 25.4 mm) cartridge
5.6 R
eplaceMent
of
tHe
s
HUtteR
The mechanical shutter (where fitted) may be replaced by the user if this is required. For a replacement
shutter (models shown in Section 1.5.3) and information on the replacement procedure please contact your
Andor representative.
5.7 c
ooling
H
oses
and
c
onnections
The user should routinely check all cooling hoses and connections for signs of leakage, damage or wear. All
seals must be intact before powering on camera system and any worn/damaged items must be replaced
immediately.
5.8 ccU-500 c
ooling
f
ans
The cooling fans of the CCU-500 disperse heat from the unit and must be inspected periodically to ensure
they are flowing freely (Section 5.3). If a fan fails please contact your Andor representative for further
information.
