Oxford Instruments ANDOR iKon-M страница 11 Скачать руководство пользователя | Manualshive

Страница: 11 / 37

background image

Version 1.4 rev 24 Apr 2019

11

IKon-M

1.2 d

isclaiMeR

THE INFORMATION CONTAINED HEREIN IS PROVIDED “AS IS” WITHOUT WARRANTY, CONDITION OR
REPRESENTATION OF ANY KIND, EITHER EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT
LIMITED TO, ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR
PURPOSE.

IN NO EVENT SHALL ANDOR BE LIABLE FOR ANY LOSS OR DAMAGE, WHETHER DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR OTHERWISE HOWSOEVER CAUSED WHETHER ARISING IN CONTRACT, TORT
OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THE USE OF THE INFORMATION PROVIDED HEREIN.

1.3 c

opyRigHt

and

p

Rotective

n

otices

The copyright in this document and the associated drawings are the property of Andor Technology Ltd. and all rights
are reserved. This document and the associated drawings are issued on condition that they are not copied, reprinted or
reproduced, nor their contents disclosed.

The publication of information in this documentation does not imply freedom from any patent or proprietary right of
Andor Technology Ltd. or any third party.

1.4 t

RadeMaRks

and

p

atent

i

nfoRMation

Andor and the Andor logo are trademarks of Andor Technology Ltd. Andor Technology Ltd. is an Oxford Instruments
company. All other marks are property of their owners.

iKon-M Series Manufacturers Information

Andor Technology Ltd., Belfast, BT12 7AL, UK.

«
...
9
10
11
12
13
...
»

Содержание ANDOR iKon-M






































Отзывы:

Нет отзывов

Похожие инструкции для ANDOR iKon-M

Бренд: Delta Страницы: 5

Бренд: Uniden Страницы: 20

JENOPTIK C 3.1 SL

Бренд: Concord Camera Страницы: 50

Visiondrive 84 04 63

Бренд: Conrad Страницы: 8

Бренд: Pentax Страницы: 124

Бренд: Tamron Страницы: 3

Бренд: chinavasion Страницы: 11

Бренд: IDT Страницы: 33

Бренд: Greenleaf Страницы: 3

Бренд: Casio Страницы: 53

e.Frame C/E Series

Бренд: Forenex Страницы: 20

Бренд: National Geographic Страницы: 132

Бренд: Mini Gadgets Страницы: 5

Бренд: Sunpak Страницы: 1

Visualizer VZ-5B

Бренд: WolfVision Страницы: 5

Бренд: Omron Страницы: 62

Бренд: DSE Страницы: 2

Бренд: Xview Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды