Version 1.4 rev 23 Oct 2017
Aspen
15
3.4 u
Sing
your
a
Spen
c
amera
on
a
n
eTwork
Apogee Aspen cameras can be connected to a PC via a network connection. Camera network settings can be
configured through any common web browser.
3.4.1 S
eTTing
up
your
a
Spen
camera
for
uSe
on
a
n
eTwork
If you do not already know the camera IP address, you can use the ApogeeCameraInfo utility to help locate the camera.
1. Aspen cameras ship with DHCP turned on by default, so in order for the PC to recognise the camera via
Ethernet, the camera must be on a network with a router to assign it an IP address.
2. Once you have obtained the IP address, enter it into the Address bar of your internet browser.
3. The camera will reply with its own web page, as shown below.
The Home page
4. The Home page shows the network settings and picture count of the camera. There are also links to adjust the
network settings, reboot the interface, and adjust advanced settings. When you click one of these links, the
camera will present you with an authentication dialog box:
Содержание Andor Apogee Aspen Series
Страница 1: ...Apogee Aspen Series Hardware Guide andor com Andor Technology Ltd 2017 Version 1 4 rev 23 Oct 2017 ...
Страница 33: ...Version 1 4 rev 23 Oct 2017 Aspen 33 8 4 Aspen Mechanical Drawings 8 4 1 G01 ...
Страница 34: ...Version 1 4 rev 23 Oct 2017 Aspen 34 8 4 2 G07 ...
Страница 35: ...Version 1 4 rev 23 Oct 2017 Aspen 35 8 4 3 G09 ...