OXE 30-0100-125, Руководство по обслуживанию

Страница: 25 / 260

25
OXE 150/200 HP SERVICE MANUAL
(1) = Use new fastener.
SPECIFICATIONS
Application
Specification
Metric Imperial
Crankshaft Position Sensor 9 Nm 80 lb in
Crankshaft Position Sensor Bolt 9 Nm 80 lb in
Crankshaft Rear Oil Seal Housing Bolt 9 Nm 80 lb in
Cylinder Head – Ribe Bolts
- First Pass 20 Nm (1) 15 lb ft (1)
- Second Pass 65 Nm 48 lb ft
- Third Pass 90 degrees
- Fourth Pass 90 degrees
- Final Pass 90 degrees
Cylinder Head – Torx T60 Bolts
- First Pass 20 Nm (1) 15 lb ft (1)
- Second Pass 65 Nm 48 lb ft
- Third Pass 90 degrees
- Fourth Pass 90 degrees
- Final Pass 90 degrees
Cylinder Head Core Hole Plug 15 Nm 11 lb ft
Alternator Drive Belt
- Idler Pulley Bolt 22 Nm 16 lb ft
- Tensioner Bolt 22 Nm 16 lb ft
- Drive Belt Tensioner Fastener (QtNm: 2) 22 Nm 16 lb ft
- Engine Flywheel Bolt 160 Nm 118 lb ft
- Engine Oil Pressure Switch 30 Nm 22 lb ft
Engine Wiring Harness Ground
- Bolt – M6 9 Nm 80 lb in
- Bolt – M8 25 Nm 18 lb ft
Exhaust Camshaft Sprocket Bolt
- First Pass 40 Nm 30 lb ft
- Final Pass 55 degrees
(1) = Use new fastener.