OXE 125, Руководство пользователя

Страница: 55 / 84

49
5.
Remove the sight glass and
washer. Fill up with Hydraulic
oil until the oil comes out at
the upper oil plug
(1)
. Refer
to
Recommended fluids and
grease
.
6.
Clean the sightglass. Install a
new
seal.
Tighten to 16 Nm (11.8 ft-lb) .
1.
Alternatively, use an oil filling
device and fill up the oil
through the oil plug hole
(2)
until oil comes out at oil plug
hole (1) .
NOTE! Clean the magnetic oil plugs.
Install new seals.
2.
Remove the filling hose and
tighten oil plug
(2) and (1) to
9 Nm (6.6 ft-lb)
.
Change coolant
1.
Remove the cap (1) of the
expansion tank
(2)
.
2.
Fit a hose
(4)
to the coolant
drain adapter
(3)
.
3.
Drain the coolant/water
mixture into a suitable
container.
4.
Remove the hose (4) from the
drain adapter.
5.
Fill up with coolant/water-
mixture at the expansion tank
cap up to 4 cm below filling
neck. Refer to
Recommended
fluids and grease
.
The cooling system of the engine is
to be filled with a mixture of distilled
water and antifreeze based on
ethylene glycol and/or anticorrosion
additive.
Te
ch
ni
ca
l d
at
a
M
ai
nt
ena
nc
e
O
per
at
in
g
O
ve
rv
ie
w