1.Safety Information
Data Record Function
Data record function includes manual record and auto record. You can use any or
both functions to record the data. Manual and automatic records share a table of
data stored in internal storage. The maximum number of recorded points is 1000.
After collecting the data, it can be exported to the computer.
Manual record
: Press the
key -> Manual -> Save softkey to save current
reading to the DB data.
Auto record
: Press the
key -> Auto softkey, after setting number of
readings, sample interval, press the Start softkey to the DB data.
Manual Record
1. Collect data
: Press the front panel
key, press the Manual softkey.
Press the Save softkey once to save the current reading to the data table by
serial number. The icon will show up on the top of the display.
Note
: The measurement function can be switched during manual record.
Save only the main display readings.
2. View the manual record
: Press the front panel
key, press the Manual
softkey to display the data table. Press
or
keys to turn the page.
Note:
When the recording data exceeds the current range,
the data will be
marked as "overload".
When the relative value operation is enabled, the recorded data is still the
reading when the relative value is closed.
3. Clear the manual record
: Press the Clear softkey to clear all data in the data
table. (Note: because manual and automatic records share the same data
table, automatic readings are also erased.).
30
