5.Advanced User Guidebook
53
Figure 5-10 Waveform of Voltage Cursor Measurement
Carry out the steps below for the time cursor measurement of the channel CH1:
1.
Press the
Cursor
button.
2.
Select
Source
in the bottom menu; select
①
in the left menu.
3.
Select
Type
in the bottom menu; select
Time
in the right menu. Two red
dotted lines displayed along the vertical direction of the screen, which
indicating L1 and L2.
4.
Select
Line
in the bottom menu; select
L1
in the right menu. The
icon
will appear beside the dotted line of L1, represents you can turn the
G
knob
to adjust the position of L1. Select
L2
to adjust the position of L2. Select
L1&L2
to adjust the two cursors together. The cursor measure window at the
top right shows the present time of cursor 1 and cursor 2, the absolute
difference and the frequency (see
).
Содержание tds series
Страница 1: ......
