4.Panel Operation
13
baud rate setting of the computer you are using.
(2) Press the
∨
arrow keys to select the
check digit
and press the
＜ / ＞
arrow
keys to toggle None, Odd, Even.
(3) Press the
∨
arrow keys to select the
stop bit
, and press the
＜ / ＞
a
rrow keys
to toggle 1 or 2.
Note: The
data bits
submenu cannot be set, and the data bits are fixed at 8 bits.
4.7
System Information
4.7.1
Review System Information
Press the
System
softkey and turn the
knob
to select the
[SYSTEM]
menu. The screen
shows the model number, version number, serial number , and checksum of the machine.
4.7.2
Restore Factory Settings
Press the
System
softkey and turn the
knob
to select the
[SYSTEM]
menu. Press
∨
arrow keys to select the
Factory Reset
submenu. Press
OK
to restore the factory default
settings. See the factory setting detail table below
Output
Voltage
Current
5 V
2 A
Limit
Voltage
Current
31.00V
5.10A
System
Backlight
50%
Buzzer
On
Port
Port
Setting
Baud Rate
115200
Data Digit
8
Parity Check
None
Stop Digit
1
Display
Number
