Own Smart HD, Руководство пользователя

Страница: 12 / 14

11
Position
The highest value
of
SAR
Standard
Head 1.186
SAR limit of Chile 1 g
(1.6 w/kg)
Used in the
body
0.768
During use, usually the actual SAR values for this device are maintained at a
level much lower than the values mentioned above. This is due to that, to
make the system work more efficiently and to minimize interference in the
network, operating on your mobile device power decreases automatically
when a full power to the call is not required. While lower the output of the
device, lower SAR value.
In order to comply with RF exposure guidelines during operation in the
body, the device must be located at a minimum distance of 1.5 cm.
FCC Statement
：
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.