OWIM 103897, Инструкция по сборке, эксплуатации и безопасности

Страница: 43 / 59

43 GB/MT
If necessary, clean the battery and
device contacts before inserting the
battery!
Promptly remove dead batteries from
the product!
Q
Inserting / replacing
batteries (fig. C / D)
Push the cover
7
backwards.
Open the battery compartment cover
8
by loosing the screw with a cross-
head screwdriver.
If necessary remove the old batteries.
Insert new batteries! Make sure you
put the batteries in the right way
round. This is shown in the battery
compartment
10
.
Close the battery compartment cover
again by tightening the screw.
The signal LED
5
flashes red
approximately every 2 seconds and
simulates the operation of the fake
camera.
Then push the cover back over the
camera casing
1
.