OWI User Manual: Model 2X2-ER2TR61
OWI INC. 15 www.owi-inc.com
INSTALLATION
NOTE: Installation is to be completed by a qualified electrical technician according to NEC/CEC code and
applicable local codes.
Installation Instructions for Speaker Combination Model 2X2-ER2TR61
The 2X2-ER2TR61 carton includes:
1. One (1) each 2X2-ER2TR61 (In-ceiling 2 Source Amplified Speaker on a 2X2 tile with backcan
enclosure)
2. One (1) each UL Listed, Level 5 (Energy Star) Power Supply
(electrical wire not included)
3. One (1) each User Manual
The 2X2-ER2TR61 Combination carton includes items 1 to 3 above plus the following:
1. UL Listed 8 ohms in-ceiling speaker model 2X2IC6NA
*Note: Quantity of 8 Ohms Ceiling speakers on a 2X2 tile with backcan depends on the SKU of the 2X2-
ER2TR61 Combination Program.
Speaker Placement
Before installing your OWI speakers, consider the placement carefully, taking into effect the location of electrical,
plumbing and other fixtures.
Placement in Ceiling
OWI speakers should be located above the primary listening area.
Mounting your OWI speakers
Determine the best area to mount your OWI speakers. It will be necessary to run your speaker wires to that
location. This location must be free of obstructions, such as electrical conduits, HVAC ducts, or water lines.
Be sure that there is at least a 5 inches clearance behind the mounting surface. Make sure that no objects block
the back of the speaker.
Remove the round cardboard disc from the template supplied and keep it for later use as a paint mask, if you
decide to paint your speakers.
Once you have determined there are no obstructions in your desired mounting location route the speaker wires
from your amplifier to your opening. Avoid routing the speaker wire near electrical wires. If you have to run them
parallel, make certain to space the speaker wires at least 2 feet from the AC line. Do not nail or staple the speaker
wire.
