OWC Jupiter Callisto, Быстрый старт, Страница: 10 / 30

OWC JUPITER CALLISTO ASSEMBLY & REPLACEMENT
7
2.2.2 Unit Removal
1. Before removing the Jupiter Callisto from your
rack, it is recommended that you remove all
drives to make it easier to remove the Jupiter
Callisto from the rack and to reduce the risk of
personal injury and/or equipment damage.
2. Make sure all cables including data and power
are disconnected from the Jupiter Callisto.
3. Remove the four rack securing screws from the
front of the Jupiter Callisto as shown in
Figure
2.2.2a
.
4. Using the handles, pull the rack toward you
until it is stopped by the security latches.
5. It is recommended to have a second person
assist the removal at this point. Press the
security latches while simultaneously sliding
the unit out just past the security latch as
illustrated in
Figure 2.2.2b
.
6. Make sure both people removing the unit have
a firm grip on the rack front and base and are
prepared to support the full width of the unit.
Continue slowly pulling the rack out until it is
free from the rails.
!
Review precautionary measures from beginning of Section 2.2 before proceeding.
Keep unit level
while removing
Figure 2.2.2a
Rack securing screws
Push security
latch to release
Slide out of rails
Figure 2.2.2b