OWC Express 4M2
Device Setup
5
7. Affix each drive’s mounting screw as shown.
Repeat Steps 6 and 7 for each SSD being
installed. The image below-left shows what
the device looks like with all four M.2 SSDs
installed. Note that you can use different
brands and capacities of SSD if you wish.
8. Take the fan housing you removed in Step 4 and place it
atop the inner chassis again, making sure that the screw
holes on the housing align with the screw holes on the inner
chassis. Re-affix the two fan housing screws (red arrows),
then reseat the power connector (green arrow).
9. Align the inner-chassis with the track in
the outer enclosure, then slide the inner
chassis into the enclosure. If there is
resistance do not force the inner chassis.
Remove it, re-align it, then try again.
10. Tighten both thrumbscrews on the back of the device
until you feel resistance. This completes the assembly
process. You can now connect the device to power and
your host computer with the included cable.
