Owandy Radiology i-max touch 3D Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 119

background image

User Manual - Introduction

NIMXEN020I

Owandy Radiology SAS

1

1.

INTRODUCTION

Note
This manual is updated for the product it is sold with, to guarantee an adequate
reference for using the product properly and safely.
The manual may not reflect changes made to the product that do not affect operating
procedures or safety.

I-MAX 3D, manufactured by Owandy Radiology, is an X-ray device for the radiographic analysis
of the maxillo-facial complex.
I-MAX 3D performs 2D Panoramic, Half-panoramic, Low dose Panoramic, Frontal dentition and
Ortho Rad Panoramic,

Bitewing Bilateral, Bitewing Left and Bitewing Right, 2D Sinus and 2D

TMJ,  3D  Dentition  with  multiple  available  FOV  centered  in  different  areas  of  the  maxillo-facial
complex  (Full  Dentition,  Maxillary  Jaw,  Mandibular  Jaw,  Maxillary  Teeth,  Mandibular  Teeth,
Extended Volume), 3D Sinus, 3D TMJ and 3D Airways.

The aim of this Manual is to instruct the user on the safe and effective use of the device.
The device must be used complying with the procedures described in this Manual and never be
used for purposes other than those indicated herein.
Please  read  this  Manual  thoroughly  before  starting  to  use  the  unit;  it  is  advisable  to  keep  the
manual close to the device, for reference while operating.
I-MAX  3D  is  an  electrical  medical  device  and  can  only  be  used  under  the  supervision  of  a
physician or of highly qualified personnel, with necessary knowledge of X-ray protection. The user
is liable for legal compliance in relation to the installation and operation of the device.

1.1 Icons appearing in the manual

This icon indicates a “NOTE”: please read the items marked by this icon thoroughly.

This icon indicates a “WARNING”: the items marked by this icon refer to safety aspects
of the patient and/or operator.

«
...
9
10
11
12
13
...
»

Содержание i-max touch 3D
























































































































Отзывы:

Нет отзывов

Похожие инструкции для i-max touch 3D

Бренд: Gardena Страницы: 33

Бренд: Backyard Adventures Playcenter Страницы: 33

Бренд: A.HABERKORN Страницы: 28

Бренд: Ultraflex Страницы: 52

Бренд: Palmgren Страницы: 12

Бренд: Bartscher Страницы: 20

Бренд: Landoll Страницы: 144

Бренд: Castellini Страницы: 299

Бренд: Lowenstein Medical Страницы: 457

GrainLogix XLB10

Бренд: LOFTNESS Страницы: 104

Бренд: NEBO Страницы: 2

Scanmate-B DGH 8000

Бренд: DGH TECHNOLOGY Страницы: 53

Бренд: Monosem Страницы: 104

Бренд: Stahls Страницы: 2

MAGIC-COLOR-STICK-1.5WH

Бренд: Ibiza Страницы: 40

Бренд: Poulan Pro Страницы: 8

Бренд: PLG Страницы: 4

Бренд: TAPKO Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды