How to establish the VPN between two RS
Series
1
Note: Here, we use the RS-1200 for the example, it can also used on
the RS-2500 and RS-3000.
Site A RS-1200 Configuration:
1.
Configure
VPN
IPSec Autokey
as following example:
Remote Gateway:
indicate the other side VPN router’s IP address
or domain name
Preshared Key:
user can define the key by himself, the key uses to
identify the exchanged data for VPN
Encryption:
support DES, 3DES, AES-128, AES-192, and AES-256,
AES-256 provides more secure encrypted type but less performance.
Authentication:
support MD5 and SHA-1
Both sides
Preshared Key
,
Encryption
and
Authentication
setting must be the same, or VPN tunnel cannot be built up.
