Overmax X-bee drone 8.0, Руководство пользователя

Страница: 29 / 68

EN
Tip: Before you start aerobatics, it is necessary to fly the drone at least 5
metres high in the air.
Flight corrections (trimmer buttons)
Move the throttle stick up slowly until the drone takes off 1.5 metres in
the air. If, when flying, the drone starts tilting or spinning in an undesirable
direction, you can use the trimmer buttons to correct the flight.
Note: When the drone flies 30 cm above the ground, it may become instable
due to the turbulence caused by its own propellers. This phenomenon is
related to the gravitation, and the force of the wind produced by the drone’s
propellers. The lighter the drone is, the more susceptible it is to the afore-
mentioned phenomenon.
When the drone rotates to the left, use the directional trimmer (right) to
correct the flight.
When the drone rotates to the right, use the directional trimmer (left) to
correct the flight.
When the drone deviates forward, use the flying trimmer (backward) to cor-
rect the flight.
When the drone deviates backward, use the flying trimmer (forward) to cor-
rect the flight.