NEO S-Series Library Service Manual
Replacing Parts
10400666-005
©2015-20 Overland-Tandberg
24
Replace the Library Controller
WARNING:
To reduce the risk of electric shock or damage to equipment, always remove any
power cords while working with the library.
WARNUNG:
Um das Risiko eines elektrischen Schlags oder Schäden am Gerät zu vermeiden,
ziehen Sie stets den Netzstecker, bevor Sie an der Einheit arbeiten.
AVERTISSEMENT:
Pour réduire le risque de choc électrique ou endommagement de l'équipement, retirez
toujours les cordons électriques en travaillant avec l'appareil.
CAUTION:
While working with the library, observe standard Electrostatic Discharge (ESD)
precautions to prevent damage to micro-circuitry or static-sensitive devices.
Prepare the Unit
1.
Verify that all host processes are
idle
.
2.
Power off the library by depressing the
power button
on the front panel.
3.
From the module containing the failed controller, unplug the
AC power cables
.
4.
Remove the
Ethernet cables
and any
USB device
from the library controller being
replaced.
Remove the Library Controller
1.
Loosen the
two blue captive thumbscrews
on the controller.
2.
Using the thumbscrews, slowly remove the
controller
from the library.
3.
Set aside the old
controller
for return to Overland.
Install the Library Controller
1.
Position the new controller on the
alignment rails
.
AC Plug
Controller
