10400414-002 05/2013
©2013 Overland Storage, Inc.
4-1
Chapter 4
Commands
Command List
This chapter describes how to use the functions provided by the data migration function and
run on the destination disk array (SnapSAN S3000/S5000).
Volume Types
Volume types to specify to be handled by data migration commands are as follows.
The identifier is a character string that indicates the volume type and is used in the
following cases:
•
When specifying the volume type by an argument (-srcflg, -dstflg, or -volflg) of a data
migration command.
•
When specifying the volume type in the data migration operation file.
Command Name
Description
iSMmc_ldlist
Listing information about logical disks and disk arrays used for data
migration
iSMmc_query
Displaying the status of data migration
iSMmc_pair
Setting and releasing the pairing for data migration, listing the pairs, and
removing the data migration attribute.
iSMmc_start
Starting data migration
iSMmc_stop
Stopping data migration
iSMmc_suspend
Suspending data migration
iSMmc_resume
Restarting data migration
iSMmc_wait
Waiting for completion of data migration
iSMmc_setconfig
Setting and displaying the configuration of data migration
iSMmc_change
Changing the data migration settings
Type
Description
Identifier
Logical disk name Specifies the logical disk name set on the disk array.
ld
Device identifier
Specifies the device identifier (T10/EUI/NAA) set on the disk
array.
di
