10400414-002 05/2013
©2013 Overland Storage, Inc.
3-8
SnapSAN S5000 Data Migration User Guide
2.
To display the WWPN for the destination disk array, select and right-click the disk
array from the product display area in the main window of SnapSAN Manager
Embedded or SnapSAN Manager and select [Properties] on the properties screen.
•
If you want to use a command for this operation, log in to the destination disk array
with the administrator privilege and execute the iSMmc_ldlist command.
In this example, the host connection port with director number 0 and port number 1
and the host connection port with the director number 1 and port number 1 are set as
the data migration ports and their WWPNs are 2200000991050243 and
2A00000991050243, respectively.
iSMmc_ldlist command execution example:
Setting Access Control on the source disk array
1.
After selecting the source disk array, select
[Bind] >[Configuration setting]
from the main
window menu of SnapSAN Manager to open the "Configuration setting" screen and
select [Access Control (FC setting)/Maintain logical disk].
2.
Select the [Access Control] tab from the "Logical disk maintenance" screen and create
an LD set under an arbitrary name and a platform with an arbitrary value (for
example, LD set name: destination disk array name, platform: WN).
3.
Select [Link path to path information] for the LD set and specify the WWPN for the
data migration port on the destination disk array.
4.
If the LD set or logical disk is locked, select [Lock/unlock] from the [Logical disk
maintenance] tab to temporally unlock the locked the LD set or logical disk and assign
Access Control.
Migration Processing Stopping the Server
This sections contains the flowchart and the data migration processing procedures for
stopping the server.
