Field Service Documentation
1
Snap Server 12000
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
The Snap Server
®
12000 Motherboard Tray Assembly
These instructions explain how to replace the motherboard tray assembly on the
Snap Server.
Replacement Part Inventory
Before you begin, make sure you have the following items from the package
containing the motherboard tray assembly:
• The motherboard PCA with DIMM, CPU, and mounting tray in an anti-static bag
• Server ID label
Tools Required
• Phillips screwdriver
• Motherboard extraction tool
Overview of the Procedure
To remove and replace the motherboard tray assembly, you perform the following
tasks:
• Shut down the server and disconnect the power cords and Ethernet cable
• Remove the old motherboard tray assembly
• Remove the Ethernet card from the old motherboard
• Install the Ethernet card on the new motherboard
• Insert the new motherboard tray assembly
• Reattach the power cords and Ethernet connector
• Restart the server
