10400328-001 02/2011
©2011 Overland Storage, Inc.
W
2-17
SnapServer GuardianOS 6.5 Setup Guide
SnapServer Hardware Checklists
Snap Expansion S50 Hardware Checklist
The following checklist shows the required and optional hardware to install an S50,
and indicates whether a component comes with the server or must be supplied by the
customer.
Component
Description
Connection and
Power
;
SAS Cable (1 per enclosure)
Required to connect the expansion array to the host SnapServer.
;
Power Cables (2 per enclosure)
Required to plug into the mains.
APC-Brand UPS Devices (optional)
The S50 should be connected to the same UPS as the SnapServer to which it is
attached.
Rack
;
Rack Mount Brackets
Two (2) rack mount shelves and screws for attaching the server to a rack.
EIA-Compliant Rack
S50 expansion arrays are designed for use with EIA-compliant 4-post racks.
