10400328-001 02/2011
©2011 Overland Storage, Inc.
W
2-16
SnapServer GuardianOS 6.5 Setup Guide
SnapServer Hardware Checklists
SnapDisk E2000 Hardware Checklist
The following checklist shows the required and optional hardware to install SnapDisk
E2000, and indicates whether a component comes with the server or must be supplied
by the customer.
Component
Description
Connection and
Power
;
SAS Cable (1 per enclosure)
Required to connect the expansion array to the host SnapServer.
;
Power Cables (6 per enclosure)
Required to plug into the mains.
APC-Brand UPS Devices (optional)
The E2000 should be connected to the same UPS as the SnapServer to which it is
attached.
Rack
;
Slide Rail Assemblies (2 per enclosure)
Two (2) slide rails and screws for attaching the server to a rack.
32 inch/36 inch, Four-post Rack
You must use a 32-inch (or greater) four-post rack to mount this server.
