Overland Storage PowerLoaders AIT-2, Руководство пользователя и инструкция по установке

Страница: 71 / 106

Operation
t
3-19
U
SING
P
OWER
L
OADER
™ M
ENUS
Inserting Cartridges into the Magazine
A full magazine is shown in the following illustration. Insert cartridges so that the label end
with the write protect switch is outward, with the write protect switch toward the bottom of the
magazine. The lowest numbered cartridge slot in the magazine is next to the mail slot. The mail
slot is closest to the handle.
Figure 3–30. Tape Magazine With Cartridges Installed
Inserting the Magazine
If the magazine door on the front of the PowerLoader™ is closed and locked, open it, as follows.
Enter the Menu Mode by pressing the
Enter
button at the Default Screen. At the Main Menu,
select Remove Magazine and press the
Enter
button. The magazine door swings open. Slide the
magazine through the door opening, with the cartridges protruding from the left. When the
magazine is fully inserted, push the door closed until it locks.
Slot 19
Slot 1