Overland Storage PowerLoaders AIT-2, Руководство пользователя и инструкция по установке

Страница: 67 / 106

Operation
t
3-15
U
SING
P
OWER
L
OADER
™ M
ENUS
The next time you try to enter Menu Mode, the following screen displays. You can still display
the Status Menu without using the security code by pressing the
Escape
button at the Default
Screen.
Figure 3–19. Panel Locked Screen
When you press the Enter button, the following screen displays:
Figure 3–20. Code Entry Submenu
Using the p button and the q Buttons, set the first digit of the unlock code. Press the
Enter
button to move the cursor to the second digit and repeat the process. When you have finished,
press the
Escape
button. The Code Validate Submenu displays
Figure 3–21. Code Validate Submenu
Press the Enter button to validate your choice. If the code is correct, the Main Menu is displayed.
If the code is incorrect, an error screen displays. If you have forgotten your unlock code, contact
your technical support representative for assistance.
Loading and Unloading
The Load/Unload menus allow you to specify a source and a destination for a cartridge
movement, so you use exactly the same procedure to load and unload. To load or unload a tape
from the front panel, use the Load/Unload menus as follows:
Figure 3–22. Default Screen
From the Default Screen, enter the Menu Mode by pressing the Enter button. The Main Menu
displays with the
u next to Load/Unload.
Front Panel
ENTER to Unlock
ESCAPE to
Unlock Code
#
“
$
“
Unlock Code
✶ ✶✶ ✶
“XXXX”
ENTER to Accept
ESCAPE to
#
$
1
u u u u
_ _ _ _ _ _ _ _ _
t t t t
10
11
u
u u
u
_ _ _ _ _ _ _
t
t t
t
19
t t t t
Loader Idle