Overland Data LoaderXpress LXL1U11, Инструкция по установке и эксплуатации

Страница: 95 / 128

LoaderXpress - LXL1U11 6-13
3) Click on the IP address tab if it’s not currently displayed.
4) Set the IP addresses by one of the two ways presented by the tab panel:
Either click in the check box to let the addresses be set via a DHCP or
BootP server, or specify the four addresses individually. (Place the text
cursor in a field and type in new values. Use the Tab key or mouse to move
from field to field.)
5) Click Apply to accept the address settings, or OK to accept the address
settings and close Configure Web TLC dialog box.
Access Security
Since WebTLC permits total control over a library, security concerns demand that
those capabilities are limited to the appropriate users. WebTLC limits access to the
system by means of passwords set on the configuration screen. WebTLC passwords
allow granting two different levels of system access:
• Level 1 access allows operator viewing of library status only.
• Level 2 access allows full control, permiting the user to move tapes and
modify library configuration settings.
•
Level 2 access can be disabled entirely through the use of a radio button.
NOTE: The Access tab panel also permits the user to specify a familiar, mnemonic name for
your library. This name appears on many pages of your WebTLC site.