Overland Data LoaderXpress LXL1U11, Инструкция по установке и эксплуатации

Страница: 92 / 128

6-10 LoaderXpress - LXL1U11
Using the WebTLCenter Utility
WebTLCenter lets you configure the unit using the familiar Windows graphical
user interface. The utility lets you perform the following tasks:
• Establish communication with your host
•
Set IP Addresses
•
Set SNMP traps
• Specify the E-mail addresses of notification recipients
• Set Parameters for a remote FTP Server to permit file uploads
•
Set security passwords to control access
•
Name the Library for quick accurate identification
WebTLC Utility Task Procedures
Establishing Communication With Your Host
1) Turn on power.
2) Connect the null-modem cable between the connector labeled Config
on the LoaderXpress LXL1U11 and a COM port on the host computer.
(Note which port you select.)
3) Power up the host computer, and boot into Windows 95, 98, or NT 4.0.
4) Install the WebTLCenter utility from the included 3.5” Floppy disk.
(A:\Install)
5) Launch the WebTLCenter.exe application.
The WebTLCenter Main screen appears: