Overland Data LoaderXpress LXL1U11, Инструкция по установке и эксплуатации

Страница: 88 / 128

6-6 LoaderXpress - LXL1U11
4) Enter the Default Gateway “(www.xxx.yyy.zzz): _”
5) Enter the DNS Server “(www.xxx.yyy.zzz): _”
These values establish the Internet or Network address of your WebTLC and
enable the site to be accessed remotely.
NOTE: Note: To obtain the IP addresses from a BOOTP or DHCP server, enter an IP
address of 255.255.255.255 .
Set SNMP Trap Addresses
1) Enter the SNMP Trap #0 “(www.xxx.yyy.zzz): _”
2) Enter the SNMP Trap #1 “(www.xxx.yyy.zzz): _”
3) Enter the SNMP Trap #2 “(www.xxx.yyy.zzz): _”
4) Enter the SNMP Trap #3 “(www.xxx.yyy.zzz): _”
These settings enable WebTLC to send SNMP Trap information from your library
to the specified IP addresses.
Set E-mail Addresses
1) Enter the SMTP Server name (xyz.com) or address
“(www.xxx.yyy.zzz): _”
After this address is entered, you will be prompted for up to 4 E-mail addresses.
These E-mail addresses will be notified of specific events.
Set Remote FTP Server
1) Enter the Remote FTP Server Name (xyz.com) or Address
“(www.xxx.yyy.zzz): _”.
2) Enter the Remote FTP Server User Login:
3) Enter the Remote FTP Server Password:
4) Enter the Remote FTP Server Initial Directory:
These settings enable you to upload firmware to the WebTLC or your Library
from a remote ftp: site.