Overland Data LoaderXpress LXL1U11, Инструкция по установке и эксплуатации

Страница: 68 / 128

3-26 LoaderXpress - LXL1U11
Write Protection
The write protection switch of an LTO Ultrium cartridge as shown in Figure 3-24
provides you the following:
•
To enable data recording, slide the write protect switch to the left
(Unlock Symbol).
• To write protect the LTO Ultrium cartridge, slide the write protect
switch to the right (Locked Symbol) position.
Loading and Unloading Cartridges
The Load/Unload menus enable you to specify a source and a destination for a
cartridge movement. As a result, you use exactly the same procedure to load as to
unload. To load or unload a tape from the front panel of the module, use the
Load/Unload menus as follows.
Figure 3–25. Default Screen
The LTO Ultrium has a tape loaded. Slot 1 of the magazine has a cartridge present,
while the remaining slots are empty.
From the Default Screen, access the Menu Mode by pressing the Enter button. The
Main Menu displays:
Figure 3–26. Main Menu
Loader Idle
1
u
_ _ _ _ _ _ _ _ _ _ _
t 11
Load/Unload
Remove Magazine
u
Show Status Menu
Maintenance Menu