Over Armour Offroad
2515 Bypass Rd. Flemingsburg, KY 41041
606-845-7439
Instructions for Installation and Care of
Arctic Cat / Textron Wildcat Trail / Sport
Full Cab with Aero-Vent Poly Windshield
AC-TRAIL-FC04
AC-SPORT-FC04
Notice: Do not smoke inside the cab or expose the enclosure to direct flames. Cab is Flammable.
1.
Be sure to read these instructions thoroughly before opening and installing the Wildcat
Full Cab with Poly Windshield. The installation is best done when the temperature is 70
degrees F. or warmer. The temperature affects the adhesive Velcro, if conditions prevent
installing in warmer weather it helps to store the adhesive Velcro at room temperature
prior to installation.
2.
Carefully open the carton and remove the enclosure on a large flat surface that is clean
and free of dirt.
3.
Check over the parts included in the carton with the parts list shown below:
Adhesive Velcro Hook Strips:
Soft Doors
“ “ “ “
26 each------------3"
“ “ “ “
2 each------------6"
“ “ “ “
2 each------------10"
“ “ “ “
2 each------------44”
---------------------------------------------------------------------------
Adhesive Velcro Hook Strips:
Rear Window
“ “ “ “
6 each------------3”
“ “ “ “
1 each------------42”
---------------------------------------------------------------------------
Top Cap
24” Webbing Straps w/ Loop
2 each
24” Webbing Straps w/ Velcro
2 each
The cab for you Stampede is made up of 5 different components that work together to enclose
your vehicle. Install the cab in the following order.
1) Soft Doors
2) Rear Window
3) Poly Windshield
4) Top Cap
