32
106927880-V02.03.2019
Maintenance
“OV-DMC 3”
10. Maintenance
10.1 Cleaning the housing
CAUTION
Danger of electric shock if liq-
uids penetrate the power supply
f
If connected, disconnect the pow-
er supply from the mains plug.
f
Contact the Oventrop service
department
NOTICE
Damage to surfaces caused by
aggressive cleaning agents
f
Do not use abrasive powders or
cleaning agents which dissolve
plastic when cleaning.
f
If required, clean surfaces with
a soft cloth. When dealing with
more severe dirt, moisten the cloth
slightly with water or use a mild
detergent.
10.2 Service department
Follow the applicable transport
requirements for LiFEP04 (lithium iron
phosphate) batteries.
Local regulations may prescribe
transport in specially-secured con-
tainers or disposal on site, especially
for damaged batteries.
f
Transport the measuring system in its origi-
nal packaging.
f
If there is a defect, do not open the
housing. Send the product to the following
address.
f
Please send the product to the following
address for manufacturer calibration on a
regular annual basis to ensure failure-free
operation:
Oventrop GmbH & Co. KG
Industriegebiet Nord
Hinterm Gallberg 5
D-59929 Brilon
