![background image](http://html1.mh-extra.com/html/oventrop/dynatemp-tr-80/dynatemp-tr-80_installation-and-operating-instructions-for-the-specialised-installer_1662769001.webp)
For an overview of our global presence
Subject to technical modification without notice.
visit www.oventrop.com.
115305581 05/2017
Valves, controls and systems
“DynaTemp”;
“TR-80”, “TR-250”
Installation instructions for first commissioning by the specialised installer
Before installing the transformers “TR-80” (item 1153053)
and “TR-250” (item no. 1153055) as well as their accessory
components, you must carefully read and follow through
these installation instructions and the operating manual for
the respective “DynaTemp” system!
Installation, commissioning, operation and maintenance
must only be performed by trained and specialised staff in
compliance with applicable rules and regulations!
The installation instructions, the operating manual for the
respective “DynaTemp” system as well as all additionally
applicable documentation must be forwarded to the system
operator!
Content
General information ........................................................... 1
Safety instructions ............................................................. 2
Transport, storage and packaging ..................................... 2
Technical specifications ..................................................... 2
Assembly and installation .................................................. 3
Commissioning .................................................................. 3
Accessories ....................................................................... 3
Maintenance and servicing ................................................ 3
Declaration of conformity ................................................... 3
Warranty ............................................................................ 3
Transformers “TR-80” and “TR-250”
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
D-59939 Olsberg
Phone
+49 (0) 29 62 82-0
Fax
+49 (0) 29 62 82-400
Internet www.oventrop.com
1
General information
1.1 Information about the installation and operating in-
structions
These installation instructions are to be used by the trained and
specialised staff to properly install, commission and configure
the transformers “TR-80” and “TR-250” for the first time. Follow-
ing installation, additional documentation like for example the
operating manual for the associated system “DynaTemp” is to
be downloaded from the control and regulation unit (DDC) in the
“
HELP/INFO - Documentation
” menu item with an Internet
browser, e.g. “Mozilla Firefox”.
Additionally applicable documentation - instructions for all sys-
tem components as well as applicable technical rules - are to be
complied with.
1.2 Safekeeping of documentation
These installation instructions are to be stored in a safe place by
the system operator for later use.
EN