ClimaCon F
Technical description
3.3.2.4 ClimaCon F 310 - Heating or cooling
•
Dot-Matrix display for visualisation of the setpoint
temperature, the actual temperature, various error
codes, the display “BLu” for the teach-in mode, as well
as the OFF display when the device is switched off
•
LED display heating or cooling
•
LED display with touch surfaces for adjusting the
setpoint temperature via the Plus and Minus keys and
for switching between Auto and Eco mode
•
Switching between heating and cooling via change-
over signal
•
Control via app (Bluetooth)
•
Possible modes: Auto (daily or weekly schedule), Eco/
Setback, Manual
•
Frost protection (6 °C/ 43 °F) is activated when the
room thermostat is switched off
•
Temperature limitation and offset temperature
adjustable
•
Leader output for controlling the setback temperature
of a follower room thermostat
Only ClimaCon F 310 (24 V)
•
0-10 V output for controlling e.g. Air Handling Units
(AHU)
•
An external NTC temperature sensor (10 K) can be
connected for measuring the actual temperature
3.4 Operating elements and displays
3.4.1 ClimaCon F 90, F 100
1
2
Fig. 4:
Operating elements F 90, F 100
1
Rotary wheel
2
Scale
ClimaCon F 100 Switching on/off / PWM
1
Fig. 5:
F 100 Switching on/off / PWM
1
Switch position left = on/off
Switch position right = PWM
3.4.2 ClimaCon F 210, F 310
1
4
5
6
3
2
7
8
Fig. 6:
Operating elements F 210, F 310
1
“ON/OFF” key
2
Display cooling
3
“-” sign, decrease of the desired temperature
4
Temperature display
5
Display heating
6
“+” sign, increase of the desired temperature
7
“Eco mode” key
8
“Auto mode” key
9
115500984-V07.11.2022
