Ovation E-910FC, Руководство пользователя

Страница: 17 / 28

Operation
Ovation E-910FC User Manual Rev. 8 -13-
Configuration
(Standalone)
Use standalone configuration to operate the product without a DMX controller.
Auto Programs
Auto programs allow for dynamic RGBAL color mixing without a DMX controller.
1. Go to the
Auto Show main level.
2. Select the desired auto ( Auto 1 – 5 )
3. Select the desired auto program speed ( 1–100 )
You cannot edit any of the auto programs (Auto 1 – 5).
Master/Slave
The Master/Slave mode allows a group of Ovation E-910FCs (the slaves) to simultaneously
duplicate the output of another Ovation E-910FC (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the Master/Slave main level.
b. Select Slave .
2. Set the master:
a. Go to the Master/Slave main level.
b. Select Master .
•
The master is the one that runs a program whether in Auto, Virtual Color Wheel,
Color Temperature, or Manual Color Mixer modes.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Virtual Color
Wheel
The Ovation E-910FC offers over thirty pre-mixed colors based on gel colors. To select a gel
color, do the following.
1. Go to the
Virtual Color Wheel main level.
2. Select Virtual Color Wheel .
3. Select the desired color (See the Virtual Color Wheel Chart section).
4. Press <ENTER> twice.
5. Use <UP> or <DOWN> to select the Dimmer value, from 000–255 .
6. Press <ENTER> .
See the Virtual Color Wheel Chart section for details on specific values.
Color
Temperature
The Color Temperature mode offer preset white color temperatures that emulate a tungsten
lamp at the specified color temperature.
1. Go to the
Virtual Color Wheel main level.
2. Select Color Temperature .
3. Select the desired color temperature (See the Preset Color Temperature Chart section).
4. Press <ENTER> twice.
5. Use <UP> or <DOWN> to select the Dimmer value, from 000–255 .
6. Press <ENTER> .
See the Preset Color Temperature Chart section for details on specific values.
Manual Color
Mixer
The Manual Color Mixer mode allows for permanent RGBAL color mixing without a DMX
controller.
1. Go to the
Virtual Color Wheel main level.
2. Select Manual Color Mixer .
3. Select the desired color ( Red , Green , Blue , Amber , or Lime ).
4. Select the color value ( 000 – 255 ).
5. Repeat for the other colors.
Focus Mode
Focus mode allows for focusing of the Ovation E-910FC without changing any menu settings.
1. Press and hold
<ENTER> for 3 seconds. The intensity will increase to 100%.
2. Press <MENU> to exit to previous settings.