O
PERATION
Ovation C-805FC User Manual Rev. 3
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Auto Programs
Auto programs allow for dynamic RGBAL color mixing without a DMX controller.
1.
Go to the
Auto Show
main level.
2.
Select the desired auto (
Auto 1-9/Fade
).
3.
Select the desired speed (
Speed 0-100
).
Master/Slave
The Master/Slave mode allows a group of Ovation C-805FC products (the slaves) to simultaneously
duplicate the output of another Ovation C-805FC (the master) without a DMX controller.
To set each of the slaves:
1.
Go to the
Master/Slave
main level.
2.
Select
Slave
.
To set the master:
1.
Go to the
Master/Slave
main level.
2.
Select
Master
.
3.
Select an auto program as explained in Auto Programs, or VCW.
RGBA 4CH
Channel
Function
Value
Percent/Setting
1
Red
000
255
0-100%
2
Green
000
255
0-100%
3
Blue
000
255
0-100%
4
Amber
000
255
0-100%
RGB 3CH
Channel
Function
Value
Percent/Setting
1
Red
000
255
0-100%
2
Green
000
255
0-100%
3
Blue
000
255
0-100%
DMX-VCW-
CCT 3CH
Channe
l
Function
Value
Percent/Setting
1
Dimmer
000
255
0-100%
2
Virtual Color
Wheel
000
255
Refer to the
section for specific values
3
Color
Temperature
000
255
Refer to the
The auto programs cannot be edited.
•
The master is the one that runs a program whether in Auto Program or VCW
modes.
•
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
•
The master should be the first product in the daisy chain.
Содержание C-805FC
Страница 1: ...User Manual...
