background image

1 x solar light head (A)
1 x pole piece with female thread (B)
2 x pole pieces with female& male thread (C)
1 x pole piece with male thread (D)
1 x mounting base (E)
1 x ground stake (F)
3 x mounting screws (G)
3 x plastic anchors(H)

Содержание B30-006

Страница 1: ... to 30 lumens and up to 8 hours working time POSITIONING YOUR SOLAR LIGHT Your solar light includes a built in photo sensor which detects the level of surrounding natural light and controls when the light will automatically switch on and off Solar light should be placed away from other night time light sources including other solar lights as this might keep the light from automatically turning on ...

Страница 2: ...r light head A 1 x pole piece with female thread B 2 x pole pieces with female male thread C 1 x pole piece with male thread D 1 x mounting base E 1 x ground stake F 3 x mounting screws G 3 x plastic anchors H ...

Страница 3: ...ounting base over the centre of the installed ground stake Step 4 To complete installation re attach the assembled solar light into the opening at the top of the mounting base HARD SURFACE INSTALLATION Step 1 Remove mounting base from the bottom of the assembled pole and gently place light down Step 2 Using a pencil place marks through the 3 holes located around the edge of the mounting base Step ...

Страница 4: ...orrectly Check to ensure that the battery is not loose and has been installed the correct way 4 Solar light might be positioned in a shaded location limiting its exposure to the sun and not allowing the battery to fully charge 5 Solar light might be too close to another night time light source including another solar light 6 Solar panel may be dirty limiting its exposure to the sun and not allowin...

Отзывы: