44.
Carefully lift 1 completed
Rafter Section up. (make sure
Soffit is facing down) and place
on gable framing.
46.
To confirm Rafter Section alignment, in the front, Rafter will overhang Porch post by
approximately 1/2”. Rafter will also overhang the siding of Middle Gable Wall.
45.
Slide Rafter Section up on gable framing until bottom of
Ridge Board slips into gable notch. Soffit will sit approximately
1/8” away from wall panel.
Soffit should sit approx. 1/8” away
from wall panel. End Rafter will sit
flush with end of wall.
Soffit
In Porch area, a
larger gap will occur
between Soffit and
Top Plate.
Rafter will
overhang
Porch Post.
Gable Notch
Ridge
Board
Rafter
Rafter Flush with end of wall
Rafter will slightly
overhang siding of
Middle Gable Wall.
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 19