8.13.2 Use
WARNING
Incorrect application
Throttling, suffocation or strangulation due to sliding forward in the product
►
The lap belt must be put on when getting into the product and used at all times while using the product.
►
Ensure that the buckle lies in the middle of the body.
►
Remove any objects or clothing which get caught.
WARNING
Use of the belt system as a restraint system in a vehicle for transporting persons with reduced mobility
is forbidden
Falling out of the product, serious injuries due to improper handling of the product
►
Under no circumstances may the belt system be used as part of a personal restraint system for transportation
in a vehicle for transporting persons with reduced mobility.
►
Note that the belt system is only intended as additional stabilisation for the user sitting in the product.
CAUTION
Medical risks
Injuries, pressure sores due to application errors
►
Regular measures for pressure redistribution and skin examinations are required. Should skin irritation and/or
skin reddening occur, consult the qualified personnel who adapted and adjusted the product. Do not continue
using the product without consultation.
34
Applying the lap belt
1) Push the 2 halves together until the buckle engages
with an audible click.
→
The lap belt has to fit closely but not too tightly
so the user is not injured.
→
It should be possible to slide two fingers com
fortably between the strap and thigh.
2) Pull to check that it is secure.
Opening the lap belt
1) Press the release button.
2) Open the belt buckle and lay the belt to the side.
Cleaning the belt system
INFORMATION
Observe the washing recommendations on the product and the information in the corresponding instructions for
use provided for the product.
•
Straps with metal closures
may not be washed in the washing machine
as the penetration of water could
cause corrosion and subsequent malfunctions.
•
Clean the belt straps by gently dabbing them with warm soapy water (with some disinfectant) or carefully wipe
with a dry, clean, absorbent cloth.
Additional cleaning instructions
•
Allow the belts to air dry. Ensure that the belts and pads are completely dry before installation.
•
Do not expose the belts to direct heat (e.g. sunshine, stove or radiator).
•
Do not iron or bleach the belts.
45
Skippi Plus
Use
Содержание Skippi plus
Страница 1: ...Skippi Plus Instructions for use 3...