Otto Bock Skippi plus, Инструкция по эксплуатации

Страница: 25 / 76

The control panel is used to switch the power wheelchair on and off, enter driving commands and display the cur­
rent status of certain functions and components.
Front
1 Joystick
2 [On/off] button
3 LCD screen
4 [Mode] button
5 [Warning flasher on/off] button
6 [Horn] button
7 [Direction indicator left/right – on/off] button
18
8 [Lights on/off] button
Back
1 Connection for external [On/Off] button
2 Connection for external [Mode] button
3 Charging/programming receptacle
19
8.6.2 Buttons and display functions
Joystick
The speed and driving direction are controlled with the joystick (see Page 31).
When a power seat option is activated, the joystick adjusts this seat option (see Page 42).
[On/off] button
Holding this button turns the power wheelchair on or off (see Page 30).
[Mode] button
Pressing the button briefly increases/decreases the speed level (see Page 31).
Holding the button longer (for at least 2 seconds) switches the control unit to the
Power seat functions or Addi­
tional options menu.
In combination with additional operating steps, holding the button longer (at least 5 seconds) also activates/deac­
tivates the drive-away lock (see Page 32).
[Warning flasher on/off] button
All 4 warning flashers are activated/deactivated when this button is pressed.
[Horn] button
The horn will sound as long as the button is pressed.
[Direction indicator right] and [Direction indicator left] buttons
Pressing these buttons activates/deactivates the respective front and rear direction indicators. The direction indic­
ator lights turn off automatically after 20 seconds.
[Lights on/off] button
The front and rear lights are activated/deactivated by pressing this button.
25 Skippi Plus
Use