Otto Bock Lisa HR32130000, Инструкция по эксплуатации

Страница: 50 / 432

6.2.2 Adjusting the foot support
Adjusting the foot support height
1) Loosen the clamping screws in the pivot bearings on the left and right side (see fig. 14, item 1).
2) Slide the foot support bars with the foot support up or down (see fig. 14, item 2).
3) Firmly retighten the clamping screws (see fig. 14, item 1).
INFORMATION: The pivot bearings on the front frame must be lowered for lower leg lengths of
340 mm or greater.
4) To do so, loosen the mounting screws on the front frame on both sides and screw them into a lower hole (see
fig. 14, item 3).
→ The pivot bearings can now engage into a lower position.
Adjusting the foot support depth
1) Fold up the foot support.
2) Loosen the circlip on the twistlock (see fig. 15, item 1) and pull the twistlock out of the foot support bar.
3) Insert the twistlock into the second hole and secure it with the circlip.
4) Remove the screw from the foot support bar on the other side of the foot support and slide the foot support to
the second hole.
5) Tighten the screw firmly in the hole (not illustrated).
14 15
6.2.3 Adjusting the seat depth
1) Loosen and remove the screw connections on both sides of the seat surface (see fig. 16, item 1).
2) Adjust the desired seat depth, reinsert the screws and firmly tighten them (see fig. 17).
16 17
6.2.4 Engaging the wheel lock
WARNING
Insufficient braking
Accident, falling of the user due to loss of braking function
► Verify the functionality of the wheel lock prior to every use.
50
Use
Lisa