Otto Bock Invader 480S26-20000_K, Инструкция по эксплуатации

Страница: 26 / 36

Bumper
Steel component on the Rugby Attacker version (see Fig. 53). This wear part can be unscrewed and replaced if
required (see Fig. 53, item 1).
53
7.14 Additional options
The product may be equipped with additional options.
The options are firmly mounted to the product by qualified personnel or the manufacturer and are pre-adjusted by
qualified personnel at delivery.
7.15 Disassembly/transport
The wheelchair must be prepared for transport in a passenger vehicle.
1) Remove the rear wheels (see Page 17).
2) Place the disassembled wheelchair and components safely in the vehicle.
3) Securely reattach the rear wheels during reassembly.
7.16 Use in a wheelchair accessible vehicle
WARNING
Unallowable use in a wheelchair accessible vehicle
Risk of serious injury when using the product as a seat
► The product has
not
been approved by the manufacturer for use as a seat in a wheelchair accessible vehicle.
►
Always use the seats installed in the wheelchair accessible vehicle with the corresponding vehicle restraint
systems.
The product may
not
be used as a seat in a wheelchair accessible vehicle.
7.17 Care
7.17.1 Cleaning
1) Clean the padding and upholstery with warm water and a mild detergent.
2) Remove any spots with a sponge or a soft brush.
3) Rinse with clear water and let the components dry.
Important information on cleaning
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Clean plastic parts, frame parts and the chassis and wheels with a mild cleaner and a damp cloth. Dry thor­
oughly afterwards.
• Do not immerse in water. Components are not machine-washable.
• To care for aluminium or chrome, use conventional aluminium or chrome care and cleaning products.
• Do not spray the product with a pressure washer.
7.17.2 Disinfection
1) Thoroughly clean the pads before disinfecting.
2) Wipe all parts of the wheelchair with a disinfectant.
Important information about disinfecting
26 | Ottobock
Use
Invader 480S26=20000_K