Otto Bock HR2233 0000 K, Инструкция по эксплуатации

Страница: 30 / 112

10
8.3 Additional options
8.3.1 Push handle
1) Loosen the screws on the basic frame and replace them with the supplied long screws (see fig. 12, item 1).
2) Mount the adapter plate for the push handle on the side of the basic frame on which the telescoping tubes of
the wheels are installed (see fig. 12, item 2).
3) Firmly tighten the long screws (see fig. 12, item 1).
4) Insert the push handle into the adapter plate and let it engage (see fig. 11).
INFORMATION: The push handle can be removed at any time if required. To do so, pull the catch
behind the adapter plate towards you and lift the push handle up and out of the adapter plate (see
fig. 12, item 3).
11 12
8.4 Care
CAUTION
Lack of or improper cleaning
Health hazard due to infections, damage to the product due to user error
►
Clean the product at regular intervals.
► Do not clean the product with a jet of water or a pressure washer. The penetration of water can cause corro­
sion and subsequent malfunctions.
►
Check the driving behaviour of the product after cleaning it.
8.4.1 Cleaning
Clean the product regularly depending on the degree of soiling and frequency of use,
at least 1x per month
:
Important information on cleaning
• Use warm soapy water for cleaning. Add some disinfectant if needed. Carefully dab the product with a damp
cloth or sponge and wipe with a dry, clean cloth.
• Do not use any aggressive cleaners, solvents or hard brushes etc.
• Do not expose the product to direct heat (e.g. sunlight, stove or radiator heat).
30
Use
HR2233=0000_K