Otto Bock Genium 3B1, Инструкция по эксплуатации

Страница: 85 / 108

85
8.2.1 Changing the prosthesis setting using the cockpit app
2. Golf
change
MyModes
Functions
Settings
Status
General
Manage components
Imprint/Info
Product
1) Once the component is connected and in the desired mode,
tap the symbol in the main menu.
→
The navigation menu opens.
2) Tap the menu entry " Settings ".
→ A list appears with the parameters for the currently
selected mode.
3) Change the setting of the desired parameter by tapping the
"
<
", "
>
" symbols.
INFORMATION: The prosthetist's setting is marked
and, after the setting has been changed, can be
restored by tapping the "Standard" button.
8.2.2 Overview of adjustment parameters in basic mode
INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The parameters in basic mode describe the dynamic behaviour of the prosthesis in a normal gait
cycle. These parameters act as basic settings for automatically adjusting the damping behaviour
to the current motion situation (e.g. ramps, slow walking speed, etc.).
The stance function, sitting function and/or stairs and obstacles function can also be activ­
ated/deactivated. Further information on the stance function (see Page 80), sitting function (see
Page 81), stairs and obstacles function (see Page 82).
The following parameters can be modified:
Parameter Adjustment
software
range Setting
range, app Meaning
Resistance 120 – 180 +/- 10 Resistance against flexion motion e.g.
when walking down stairs or when sit­
ting down
Angle 55° – 70° +/- 3° Maximum flexion angle in the swing
phase
Stance function Deactivated
Activated 0 - deactivated
1 - activated Activation/deactivation of the stance
function. For switching with the Cock­
pit app, this function has to be activ­
ated in the adjustment software. Fur­
ther information (see Page 80).