Otto Bock Genium 3B1-2, Инструкция по эксплуатации

Страница: 55 / 480

55
2 Foreword
INFORMATION
Date of last update: 2017-02-06
► Please read this document carefully before using the product.
► Have yourself instructed by qualified personnel in the proper and safe use of the product.
► Please contact the qualified personnel if you have questions about the product (e.g. regard­
ing the start-up, use, maintenance, unexpected operating behaviour or circumstances). The
contact information for the manufacturer is found on the back page.
► Please keep this document in a safe place.
The product "Genium" is called the product/prosthesis/knee joint/component in the following.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.
3 Product description
3.1 Design
The product consists of the following components:
8
7
6
5
4
3
2
1
1. Proximal pyramid adapter
2. Optional flexion stops
3. Battery
4. Hydraulic unit
5. LED (blue) as indicator for the Bluetooth
connection
6. Receiver of the inductive charging unit
7. Distal tube clamp screws
8. Connecting cable for tube adapter
3.2 Function
This product features microprocessor control of the stance and swing phase.
The microprocessor uses the measurements of an integrated sensor system as a basis to control
a hydraulic unit that influences the damping behaviour of the product.
These sensor data are updated and evaluated 100 times per second. As a result, the behaviour of
the product is adapted to the current motion situation (gait phase) dynamically and in real time.