7.3.2 User settings (“Customizing” tab)
1. Battery indicator
2. Movements
3. Beep and vibration signals
4. Control options
5. Start Switched Joint
6. Switching modes using muscle signals
7. Switching modes with 4-stage control element or
switch
8. Automatic switch-back
9. Connection indicator
10. Configuration of the prosthetic component
11. Start the electromyography (EMG)
12. Electrode signal boosting
13. Zoom
14. Shifting the signal sequence
15. Set switching thresholds
16. MyoGraph
17. Load/save program, select default program
7.3.2.1 Battery indicator
The battery voltage is displayed while hovering with the mouse pointer.
7.3.2.2 Movements
With an active elbow joint, active terminal device or active electric wrist rotator,
the movement of the respective component is shown by a red background.
7.3.2.3 Beep and vibration signals
A beep and a vibration signal can be assigned to each prosthetic component
(elbow joint, terminal device or electric wrist rotator). These feedback signals
confirm the execution of switching for the controlled prosthetic components.
Establishing feedback signals is recommended for novice patients. Experi
enced patients usually prefer silent vibration signals.
56
Handling
DynamicArm Plus 12K110N=*
