Otto Bock 757M11 2 MyoBoy Light, Инструкция по эксплуатации, Страница: 18 / 68

18
Type BF applied part
12.2 Operating States
LED indicator Event
Batteries are ready for operation
Batteries are empty.
Replace batteries (see page 15).
12.3 Directives and manufacturer’s declaration
12.3.1 Electromagnetic environment
Tables according to IEC 60601-1-2 for the product '757M11=2 MyoBoy Light'.
This product is designed for operation in the following electromagnetic environments:
•
Operation in a professional healthcare facility (e.g. hospital, etc.)
• Operation in areas of home healthcare (e.g. use at home, use outdoors)
Observe the safety notices in the section "Information on proximity to certain areas" (Information
on Proximity to Certain Areas).
Electromagnetic emissions
Interference meas­
urements Compliance Electromagnetic environment directive
HF emissions accord­
ing to CISPR 11 Group 1/class B The product uses HF energy exclusively for its
internal functioning. Its HF emissions are
therefore very low, and interference with neigh­
bouring electronic devices is unlikely.
Harmonics according
to IEC 61000-3-2 Not applicable –
power below 75 W
–
Voltage fluctu­
ations/flicker accord­
ing to IEC 61000-3-3 Product meets the
requirements of the
standard.
–
Electromagnetic interference immunity
Phenomenon EMC basic standard
or
test procedure
Interference immunity test level
Electrostatic dis­
charge IEC 61000-4-2 ± 8 kV contact
± 2 kV, ± 4 kV, ± 8 kV, ± 15 kV air,
High-frequency elec­
tromagnetic fields IEC 61000-4-3 10 V/m
80 MHz to 2.7 GHz
80% AM at 1 kHz
Magnetic fields with
rated power frequen­
cies IEC 61000-4-8 30 A/m
50 Hz or 60 Hz
Electrical fast transi­
ents/bursts IEC 61000-4-4 ± 2 kV
100 kHz repetition rate
Surges
Line against line IEC 61000-4-5 ± 0.5 kV, ± 1 kV