Otto Bock 490E75 1 C Series, Инструкция по эксплуатации

Страница: 79 / 128

Procedure when using the TEN° LCD module
• Activate the "Seating" mode by pressing the [Mode] button (see page 37 ff.). The LCD screen indicates the
selected mode (see the following section). Depending on programming, the [Mode] button may need to be
pressed a number of times.
• In "Seating" mode, switch between the seat functions with a movement to the left/right using the respective
installed input device (e.g. joystick, navigation buttons on the TEN° LCD module, special control input
devices). The LCD screen indicates the currently selected seat function (see the following section). The driving
function is not available at this time and the speed level indicator switches off.
• Once a seat function is activated, the respective seat function is adjusted with a forward/backward movement
of the respective input device (e.g. joystick, navigation buttons on the TEN° LCD module, special control input
devices).
• The electric motor moves the seat according to the seat function as long as the input device is operated and
stops at the end positions.
• Exit the "Seating" mode by pressing the [Mode] button again. You can now toggle through the driving function
or other modes (e.g. Bluetooth mode).
7.11.9 Joystick functions
The following power seat functions can be controlled with the joystick:
VR2 control device
Function Joystick deflection (standard setting)
1)
Seat height adjustment Back: Seat surface moves up
Forward: Seat surface moves down
Seat tilt Back: Seat slowly tips back
Forward: Seat slowly tips forward to a horizontal position
Back support angle adjustment Back: Back support tilts backward
Forward: Back support tilts forward
Leg supports Back: Both leg supports move up
Forward: Both leg supports move down
1)
Direction of movement can be modified by the qualified personnel.
“Seating” mode
Display Function Deflection using the input device
1)
“Seating” mode start screen
This mode enables operation of the
power seat functions delivered with the
power wheelchair. Right: Calls up a power seat function*
Left: Calls up a power seat function*
* Consecutively, depending on order
Power seat height adjustment Back: Seat surface moves up
Forward: Seat surface moves down
Power seat tilt Back: Seat slowly tips back
Forward: Seat slowly tips forward to a
horizontal position
79 490E75=1_C
Use