Otto Bock 28R14, Инструкция по эксплуатации

Страница: 8 / 64

8
►
Please contact the manufacturer if you have questions about the product or in case of prob­
lems.
►
Report each serious incident in connection with the product, in particular a worsening of the
state of health, to the manufacturer and to the relevant authority in your country.
► Please keep this document for your records.
These instructions for use provide important information on adjusting and fitting-on the 28R14
hyperextension brace according to André Bähler.
2 Product description
2.1 Components
Scope of delivery (see fig. 1)
Item Component Article
number
Item Component Article
number
1 Sternal support 29P13 6 Protective clip 29R145
2 Chest bar 29R138 7 Closure 29R137
3 Base plate 29R135 8 Back support 29P57
4 Stomach bar 29R139 9 Waistband 29R140
5 Symphysis support 29P14 10 Closing aid 29R151
Accessories
Chest bar, short 29R138=200
Chest bar, long 29R138=350
2.2 Design
The product is ready for fitting when delivered, and can be adjusted to the patient by qualified
personnel.
The ventral part consists of plastic-coated aluminum and has special ratchet closures. These
accommodate the flexible waistband that is attached to the back support.
The sternal support and the symphysis support have an aluminum core that can be reshaped. The
length of the sternal support can be adjusted by maximum 20 mm over the chest bar. It can be
pushed freely along the chest bar.
3 Intended use
3.1 Indications for use
The brace is intended
exclusively
for orthotic fittings of the back and
exclusively
for contact with
intact skin.
The brace must be used in accordance with the indications.
3.2 Indications
• Stable traumatic fractures of the vertebral bodies in the lower thoracic and lumbar spine, with­
out neurological deficits
• Osteoporosis
The indication must be determined by the physician.
3.3 Contraindications
3.3.1 Absolute Contraindications
None known.