26 | Ottobock
13E205
9CleaningandCare
Clean the product with a damp, soft cloth and mild soap (e.g. Ottobock 453H10=1 Derma Clean)
when needed. Ensure that no liquid penetrates into the system component.
Then, dry the prosthesis component with a soft cloth.
10TechnicalData
Power supply
757B20
757B21
757B25=*
757B35=*
757B15
Ottobock EnergyPack (7.2 V)
Ottobock EnergyPack (7.2 V)
MyoEnergy Integral (7.4 V)
MyoEnergy Integral (7.4 V)
Ottobock X-ChangePack (6 V)
Static current
1 mA
Operating temperature range
0 °C – +70 °C
Storage and transport in original
packaging
-20 °C – +40 °C
Storage and transport without
packaging
-20 °C – +40 °C
Relative humidity
80% nicht kondensierend
Power off
load dependent between 30 ms and 10 s
Weight
10 g
Service life
5 years
11Liability
Otto Bock Healthcare Products GmbH, hereafter referred to as manufacturer, assumes liability
only if the user complies with the processing, operating and maintenance instructions as well
as the service intervals. The manufacturer explicitly states that this product may only be used in
combination with components that were authorized by the manufacturer (see instructions for use
and catalogs). The manufacturer does not assume liability for damage caused by component
combinations which it did not authorize.
The product may only be opened and repaired by authorized Ottobock technicians.
12CEconformity
This product meets the requirements of the 93/42/EWG guidelines for medical products. This
product has been classified as a class I product according to the classification criteria outlined
in appendix IX of the guidelines. The declaration of conformity was therefore created by Ottobock
with sole responsibility according to appendix VII of the guidelines.
