A
B
L
J
H
F
G
E
K
C
ENGLISH
CONGRATULATIONS!
You’ve purchased the finest in natural
lighting technology with your new
OttLite
®
product.
STEP 1:
PRODUCT REGISTRATION FORM
Please complete the enclosed Product
Registration Form and return it today
by mail, or register online by going to:
OttLite.com/warranty.
WARNING: To prevent electric shock,
make sure the lamp is not plugged in
until all assembly steps are complete.
STEP 2: LAMP ASSEMBLY
1. Make sure the lamp is not plugged
into an electrical socket.
2. Unpack all lamp parts and lay out on
the floor with the base
(A) lying flat.
3. Thread pole
(B) to base (A) by hand,
turning clockwise until tight.
4. Thread arm
(L) to pole (B).
5. If installed, remove socket ring
(C)
from socket assembly
(F).
6. Place shade
(E) on socket assembly
(F).
7. Secure shade
(E) in place by
threading socket ring
(C) onto socket
assembly
(F) and firmly tighten by
hand.
8. Install bulb
(K) following BULB
INSERTION/REPLACEMENT
instructions.
9. Plug the lamp into a standard 120V
outlet.
10. Adjust shade height and angle
by turning thumb levers
(H, J)
counterclockwise to loosen,
reposition shade then turn thumb
levers
(H, J) clockwise to tighten.
11. Turn lamp on or off by rotating the
switch
(G) located on the socket
clockwise.
STEP 3:
BULB INSERTION/REPLACEMENT
1. Make sure the lamp is not plugged
into an electrical socket.
2. If the lamp has been in use, allow
it to cool approximately 5 minutes
before proceeding.
3. To install a bulb
(K) in the socket,
grasp the bulb firmly in your hand
and push the bulb straight into the
socket by applying pressure to the
base of bulb, until it “snaps” into
place. Do not apply pressure to the
glass end of the bulb.
4. To remove a bulb
(K) already
installed in the lamp, grasp it firmly
in your hand and pull it straight out
of the socket.
Do not twist or turn
the bulb while removing it from the
socket.
5. Turn lamp on or off by rotating the
switch
(G), located on the socket,
clockwise.
Please note that in operation, OttLite
®
bulbs are not dimmable.
Enjoy your OttLite
®
Auburndale Desk
lamp!
This lighting system is designed
for use with OttLite
®
type tubes
(Style Number SB20-M). Use of other
products voids the warranty and
may result in damage to the lighting
system.
CAUTION! IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A FEATURE TO
REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE
PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A
QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED.
DO NOT ALTER THE PLUG.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
AVERTISSEMENT! IMPORTANTES DIRECTIVES DE
SÉCURITÉ:
CETTE LAMPE PORTATIVE EST MUNIE D’UNE FICHE POLARISÉE (UNE LAME PLUS LARGE QUE L’AUTRE). CE
DISPOSITIF DE SÉCURITÉ DIMINUE LE RISQUE DE CHOCS ÉLECTRIQUES PUISQUE LA FICHE NE S’INSÈRE DANS
LA PRISE QUE D’UN SEUL CÔTÉ. SI ELLE N’ENTRE PAS DANS LA PRISE, INVERSEZ-LA. SI ELLE N’ENTRE
TOUJOURS PAS, CONTACTEZ UN ÉLECTRICIEN QUALIFIÉ. N’UTILISEZ JAMAIS AVEC UNE RALLONGE SAUF SI
LA FICHE S’INSÈRE ENTIÈREMENT. NE MODIFIEZ PAS CE DISPOSITIF DE SÉCURITÉ.
AVERTISSEMENT:
POUR ÉVITER LES CHOCS ÉLECTRIQUE, INSÉREZ LE BOUT LARGE DE
LA FICHE DANS LA GRANDE FENTE ET POUSSEZ JUSQU’AU BOUT.
¡PRECAUCIÓN! INSTRUCCIONES DE SEGURIDAD
IMPORTANTES:
ESTA LÁMPARA PORTÁTIL TIENE UN ENCHUFE POLARIZADO (UNA DE SUS PATAS ES MÁS ANCHA QUE LA
OTRA) COMO CARACTERISTICA PARA REDUCIR EL RIESGO DE UNA DESCARGA ELÉCTRICA. ESTE ENCHUFE
ENCAJARÁ EN CUALQUIER TOMACORRIENTE POLARIZADO SOLO DE UNA MANERA. SI EL ENCHUFE NO CALZA
COMPLETAMENTE EN EL TOMACORRIENTE DÉLE LA VUELTA. SI AÚN NO ENCAJA, PÓNGASE EN CONTACTO
CON UN ELECTRICISTA CALIFICADO. NUNCA UTILICE UNA EXTENSIÓN A NO SER QUE EL ENCHUFE PUEDA SER
TOTALMENTE INSERTADO. NO ALTERE EL ENCHUFE.
PRECAUCIÓN:
PARA PREVENIR UNA DESCARGA ELÉCTRICA, HAGA COINCIDIR LA PATA ANCHA
DEL ENCHUFE CON LA RANURA ANCHA, INSERTE TOTALMENTE.
20w Auburndale Table Lamp
CAUTION!
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Indoor use only.
20w Auburndale Table Lamp
20G48BZ1 20G48BZ1-SHPR
S2913-2
INS-18-0431
REV080108
G
K
H
J
L
F
E
C
A
B
